Contact Us!

(866) 530. 7333 (SEED)

(855) 733-3649 (SEEDMIX)

Email: info@evergreenseedsupply.com

300 S. Chestnut, Suite B

Deshler, Ohio 43516

  • Facebook Social Icon

Best Management Practice Products

Silt Fence

Silt Fence

Geotextile

Economy

Standard

Oakland Co

MDOT

ODOT

24" x 100'

24" x 100'

24" x 100'

36" x 100'

36" x 100'

Hardwood Posts

Post Spacing

1.5" x 1.5" x 32"

10' center No Lath

1.5" x 1.5" x 32"

10' on center

1.5" x 1.5" x 32"

6'  on center 

2.5" x 2.5" x 38"

6.25' on center

1.5" x 1.5" x 1.5"

10' center No Lath

Straw Wattles

Straw Wattles

Straw Wattles

Coir Log

Wattle Stakes

Standard Size

Standard Size

Standard Size

Hardwood

9" x 25'

12 wattles/pallet = 300 lf.

12" x 20'

10 wattles/pallet = 200 lf.

12" x 10'

Ask about shipping method

1" x 1" x 18"

with pencil point tip

Inlet Protection

VertiPro - Vertical Sediment Control Appliances for Highway Median & Yard Inlets.​

Construction Site NPDES Phase II Compliant. In use on hundreds of construction sites since 1997. Very easy to install, maintain and remove and is highly re-useable from one job to the next. Tough woven polypropylene monofiliment filter fabric will last for years under normal use. Made sturdy with welded aluminum top and bottom frames with collapsible & replaceable vertical support legs. Perfect for airport and highway traffic safety. The top frame remains level to insure uniform direct flow during severe rain events. Vertipro mounts to the surface of bar and cast iron grates with toggle bolts. Each Vertipro is custom manufactured to fit the various sizes, shapes and slopes of drop inlet grates.

 

​​How it works: Storm water is pooled in the sump area around the Vertipro while it waits to flow through the vertical fabric. The slow moving water allows heavier sediments and silt to settle out of the water column. Once storm water reaches the top of the Vertipro during severe rain events it will flow unimpeded into the inlet without flooding roadways or adjacent property.

 

Slammer - Cost Effective Sediment Control Appliance for Curb & Gutter Inlets.​​

Construction Site NPDES Phase II Compliant. In use on hundreds of construction sites since 1997. Built in free board flow to keep ponding storm water close to the inlet and reduce street flooding. Very easy to install, maintain and remove and is highly re-useable from one job to the next. Tough woven polypropylene monofiliment filter fabric will last for years under normal use. Constructed of 100% recycled die cut tire rubber bonded to woven polypropylene filter media.

Perfect for Street and highway traffic safety. Automobile, pedestrian and street sweeper traffic safe. Reduced worker exposure to injury by eliminating the need to lift the heavy cast iron grates. ​Slammer mounts in seconds to the surface cast iron grates with our approved adhesive. Each Slammer is custom manufactured to fit the various sizes, shapes of curb and gutter inlet grates. Eliminate heavy equipment requirements for installing, inspecting and maintaining your inlet protection.

​​How it works: Storm water is pooled in the gutter or sump area around the Slammer while it waits to flow through the fabric. The slow moving water allows heavier sediments and silt to settle out of the water column. Once storm water reaches the top of the Slammer during severe rain events it will flow unimpeded into the inlet without flooding roadways or adjacent property.

GrateFX - Sediment Control Appliance for Rolled Curb & Drop Inlets With Traffic.​

Construction Site NPDES Phase II Compliant. In use on hundreds of construction sites since 1997. Curb Type has built in free board flow to keep ponding storm water close to the inlet and reduce street flooding. Very easy to install, maintain and remove and is highly re-useable from one job to the next. Tough woven polypropylene monofiliment filter fabric will last for years under normal use. Constructed of 100% recycled die cut tire rubber bonded to woven polypropylene filter media. Perfect for parking lot, street and highway traffic safety. Auto, pedestrian and street sweeper traffic safe. Reduced worker exposure to injury by eliminating the need to lift the heavy cast iron grates. ​ GrateFX mounts in seconds to the surface of bar and cast iron grates with our approved adhesive. Each GrateFX is custom manufactured to fit the various sizes, shapes of curb and gutter inlet grates. Eliminate heavy equipment requirements for installing, inspecting and maintaining your inlet protection.Sizes range from 3" to 84" round, square or rectangle.

 

​​How it works: Storm water is pooled in the gutter or sump area around the GrateFX while it waits to flow through the fabric. The slow moving water allows heavier sediments and silt to settle out of the water column. Once storm water reaches the top of the curb type GrateFX during severe rain events it will flow unimpeded into the inlet without flooding roadways or adjacent property.

Water-Fill Diversion/Dam Bladder

Tubular water-fill ground bladders are made of 22oz poly fabric with rugged uv coating. Also made of XR-5 material that performs in hostile hazmat conditions. Fitted with a 1 ¼ diameter fill port and a high pressure drain port lined with ¾ inc pipe threads. Used for erosion control, water diversion, emergency deployment, shelters and portable weight for tarps, landfills. Available in high visibility interstate orange and standard gray, installation and removal quick and easy with one man. An alternative to sandbagging. Secures in place with spikes or rebar through provided line passes.

Compost Filter Sock

Compost filled filter sock is a tubular mesh fabric filled with composted organic material. It is used in place of silt fence on job sites to help keep silt and other pollutants out of waterways. Also used for ditch checks.

Dewatering Bags

Standard Sizes: 6′ X 6′,10′ X 15′,15′ X 15′

All bags are made from heavy 8oz Non Woven Geotextile Fabric. The stitching is a Durable Double Thread Chain Stitch.

Custom Sizes are available.